After looking for months I was never able to find where anyone had ever designed and produced a quality bracket online. So, I designed and made a bracket that you can use a Banshee Rear Hydro Brake Caliber using your existing Blaster Rear Housing and Bracket, eliminating the need to switch to a Banshee Housing. Also with simple materials purchased at a local hardware store I installed the brake lever and plunger to the frame. Some cutting and grinding are required for this part. I did have to purchase a longer brake line because I have an extended swing arm but as you can see in my photo I purchased one too long. A new shorter one on its way to clean it up.
Anyone interested send me a PM and I will send you a full-scale detail of my bracket you can print out and the parts list you will need to purchase from your local hardware store. You will need to purchase your own Rear Banshee Caliber set up, there are plenty on ebay.
Anyone interested send me a PM and I will send you a full-scale detail of my bracket you can print out and the parts list you will need to purchase from your local hardware store. You will need to purchase your own Rear Banshee Caliber set up, there are plenty on ebay.