I purchased a 96 blaster for a project, This is my 2nd quad but first blaster!, First quad was an 86 LT250R, Back to the point.. Its a 1996 Yamaha Blaster with a fresh rebuilt motor, compression test brought back 134-135, Its not getting spark though. The guy told me it was the stator/magneto so we messed around with it and noticed about an 8th inch of the crank bolt was stripped out, and I can not find a metric LH thread nut for it in my town!!, Whenever you kick the quad the head light will flicker so it has to be getting 12v.. So I'm not really 100% sure on where to begin on this thing, I do have an owners manual with it but it doesn't really give reasoning to no spark!, I tried swapping the coil with a coil from another 1995 Yamaha 200cc motor but it had no effect either!, I can buy the whole wiring harness with everything intact for 25$ if that would help.. I'm really hoping to get this running sometime before winter! I will have pictures up here shortly! Just a stock Dark blue/yellow blaster lol