Blaster Upper Ball Joint Kit for stock a arms Camber fix Balljoint all years

[pbblaster2]

For those of you who are interested in a better handling front end without buying aarms this is for you..

NEW Blaster Upper Ball Joint Kit for stock a arms Camber fix Balljoint all years | eBay

 

[brandoz28]

have any suggestions for how to jig this up for any interested parties?

 

[Blaner]

Mmm this all depends on how well you jig this up before welding. If you set those tubes up at the wrong angle or different angles, all is lost.

 

[sicivicdude]

have any suggestions for how to jig this up for any interested parties?

ahhhhh yes, those pesky details.....

 

[Larry's Shee]

I see no mention of instructions with it.X( As Blaner mentioned orientation of up and down, front to back is critical, plus my simple mind says L & R jig would be different. Plus it's about 20% of cost of new arms.

Someone ought to message seller about instructions. OK, I will

 

[sicivicdude]

I see no mention of instructions with it.X( As Blaner mentioned orientation of up and down, front to back is critical, plus my simple mind says L & R jig would be different. Plus it's about 20% of cost of new arms.

Someone ought to message seller about instructions. OK, I will

Thanks for taking that initiative! I was thinking the same thing, perhaps some explanation from the seller is in order.

 

[Larry's Shee]

Ok, questions sent, will post answer when received.
I also sent a linc to this thread.

 

[Blaner]

good show LS..keep us posted

 

[Larry's Shee]

This is my Q to them "Several of us on Blaster Forum are interested in your product. I realize it's a DIY, but do the instructions tell how/ where to cut and how to orient sleeves front to back, up and down? Here's thread "

This is all the reply I got from them. "We have a jig for it - We charge $55.00 to install the joint holders in one pair."

If anyone wants to message them with a better worded question have at it. If I were selling a product such as this it would have instructions as detailed as Blaners YFZ front end mod. Think they would have said something like "" O yes , we supply very detailed instructions that an average DIYer can follow""

Sorry I'm not sharp enough to be able to show complete mail, but at least I coppied and pasted.

 

[Blaner]

thats poor, really, so everyon ewho buys a set has to send their a arms to them get modded? mmmm...............

 

[blasterdemon7]

I sent a massage to the seller inviting him to this forum to hopefully answer our questions.

 

[super noober]

at 75 for the kit and 55 to have them install it plus shippping u might as well get real a/m arms

 

[sicivicdude]

at 75 for the kit and 55 to have them install it plus shippping u might as well get real a/m arms

Yeah, at $130 plus shipping, you're starting to get into the realm of getting a whole upgraded suspension..... and while it would be nice to have changeable upper ball joints, that still leaves the lowers unchangable, the stock length shocks being the only choice, and the a-arms short....