My blaster is leaking motor oil from the the hose at the bottom end that goes to front of the bike its an 04. it only happens while driving and a lil after. Whats wrong with it and is there anyway to fix it?
Blaster leaking motor oil from hose on bottom end
- Thread starter stayblazin
- Start date
that is your crank case ventalation hose. you have to much gear oil. you can fix it by draining your gear oil and refilling it with fresh bel ray gear saver. It takes about 3/4 of a quart to fill it up. Anymore than that is too much.
correct me if im wrong, but the crankcase is sealed off from the tranny so if there is tranny oil coming out of that vent hose, then u might have a bad crank seal, also it could be 2 stroke oil from the premix, that is what lubes the crank anyway
both you guys are wrong. you dont need any oil in 2 strokes...um wait that doesn sound right. i have no idea what that could be. good luck.
how is gear oil getting INTO the case then? gear oil should just sit in the clutch side of the bottom end right? That is something that I do know I am right about.
Yes he does. So he needs to take some out before the excess oil blows his crank seals and ends up in the crank case.
thanx flyers, duh i shoudve realized that the crank side has to build compression in it therefore has to be sealed. it couldnt build compression with a vent hose in it!!
Similar threads
