adj. timing plate?

[little3mil]

Can i just buy the adjustable plate and bolt my stator onto it? i was thinking about the ricky stator one for 35 bucks looks simple and quality, or theres some aluminum "pro design billet" one for 80 bucks which seems a little crazy to me :-/ Has anyone used the ricky stator one if so do you like it?

need to go +5 adv. with my build I:I

 

[yb200]

adjusting the timing wont do much

 

[Blasterdude27]

adjusting the timing wont do much

This is debatable... some have bumped it up 3-4 degrees and seen a great increase, others don't notice crap so they crank it up 6-8* and bingo. It depends on the set up you have and the riding you do..much like any other mod.

 

[little3mil]

adjusting the timing wont do much

YB, if someone told you to jump off a bridge would you??

Now back to the question does anyone run the ricky stator timing plate, if so do you like it?

 

[little3mil]

do you have your timing advanced yb?? cus if you dont with all that motor-jazz listed in your sig im rofl at you

 

[TechBlaster]

do you have your timing advanced yb?? cus if you dont with all that motor-jazz listed in your sig im rofl at you

If I am not mistaken, YB had a *4 advance, but with the Kennedy build it was recommended for him to suppress the advance timing back to stock.

Sound about right YB??

Can you give their reasoning to this if so?

 

[blasterfreek30]

i dont have the pro design.....but i do have the ricky stator adjustable plate...im set at +6 right now....but still have not rode the damn thing

 

[TechBlaster]

i dont have the pro design.....but i do have the ricky stator adjustable plate...im set at +6 right now....but still have not rode the damn thing

Well, you better GIDDY up there Freek, haha...

Still plannin on trying to get to Fenoff next SAT?
Hope so, if not, hope we can meet up sometime there through the season. I am gonna check it out next SAT, and see how it goes. Fingers crossed...

 

[blasterfreek30]

im not sure on next sat.....but im gonna shoot for the 3rd and 4th of april.....i still gotta get some things

 

[Blastizzle]

What I'm wondering is that with the minor mods i have is it beneficial to get the ricky plate rather than do the dremmel mod? I have the gaskets brand new and don't want to waste them. My plans are to do the +3 stroker with the aggressive trail port, redesign head setup....Spend the money and get the ricky plate? Sorry holeshot don't mean to thread jack.

 

[little3mil]

i dont have the pro design.....but i do have the ricky stator adjustable plate...im set at +6 right now....but still have not rode the damn thing

ok I guess im going for the ricky one then. gunna make em' say uuhhhhh-nah nah na nah

 

[DUALSTROKE]

I Have 2 adjustable plates.One is by RM stator and the other by ricky stator.Ricky stator has a bad rep for there stators.Both plates have held up great for me.You here me master P.lol

 

[little3mil]

I Have 2 adjustable plates.One is by RM stator and the other by ricky stator.Ricky stator has a bad rep for there stators.Both plates have held up great for me.You here me master P.lol

awesome info man thanks, +rep for you bud. I can use my stock stator with the ricky plate i hope...?

 

[blasterfreek30]

awesome info man thanks, +rep for you bud. I can use my stock stator with the ricky plate i hope...?

nah bro u have to switch all the wiring and coils over from ur stock plate to the RS plate

 

[DUALSTROKE]

Thanks bro,Yes you can use the stock stator as freek said you need to switch it all over to the new plate.Here is some pics I have in the collection of when I did mine.There is no tywraps on the wiring in the pics but there needs to be 2 small tywraps around the wiring to the plate.You need to cut the old plate so you can get the wiring out.Hope this helps.

 

[wolf1]

what parts are you needing freak? i may have some of it.

have two blasters we ride and two spare engines for parts

 

[yzrider]

i'm just gonna use my stock plate and go +4 or +5, idk, i have a fairly stock engine

 

[little3mil]

im doing it for the ported jug i got comming soon. dualstroke thanks for the pic that will make it easy

 

[DUALSTROKE]

im doing it for the ported jug i got comming soon. dualstroke thanks for the pic that will make it easy

No problem bro.Anytime.

 

[TechBlaster]

No problem bro.Anytime.

Good info guys, glad I was a fly on the wall.
I am going to fit a Ricky as well and play with +4* to start...