350$ 2001 Blaster

[BLASTER 02]

Picked up this blaster about a week ago. Pts a complete roller and has the bottom end (needs crank bearings and crank rebuild), stock bore cylinder but the old piston wasn't included. also a toomey pipe. what do you thing about the head? Bore or Hone because of the rust drips. Hows the ports? Stock? comments...

 

[blasty 95]

Put that toomey on your black and white blaster feel some power!!

 

[BLASTER 02]

i did lol it sick painted it black....ill take some pis tomorrow.

 

[vspec]

looks like someone cleaned up the ports, and the top port looks like it was opened up.

 

[BLASTER 02]

Thats what i thought but im not an expert... What do you thing about the cyl hone or bore.

 

[vspec]

as long as the cylinder isn't out of round and there are no deep scuffs I don't see why you couldn't hone it and keep the stock bore.

just measure it with a micrometer to be sure.

 

[blasty 95]

toomey blows fmf out of the water...to rusty to get all of it off?

 

[BLASTER 02]

Nope i cleaned it all up with a wire wheel. Previous owner sprayed reg paint on the mid pipe so it was hard to clean that up but its good now and i hit it with some high heat paint. I noticed the diff. Makes me wanna throw fmf in the garbage lol.

 

[BLASTER 02]

Any one got good paint ideas im thinkin a nice blue or red frame...

 

[BLASTER 02]

if any one has a lot of stock parts pm me. i need a few things.. also got it down to the frame will take pics tomorrow. aircraft paint remover time!

 

[BLASTER 02]

started cleaning up the plastics for pain. Sanded them with 220. also used some gorilla glue and JB weld to fix the cracks and deep scratches.

Started to sand blast the rims.

Bought this bottom end rebuild kit by Wiseco for 130$.

 

[BLASTER 02]

just got in my bottom end rebuild kit by wiseco! 130$ starting to split the cases.

 

[quadsrus1]

Looking good are you using a splitting tool?

 

[BLASTER 02]

this is my first time doing this. is there a way to do this without it because the tool is like 60$

 

[BLASTER 02]

waiting on my crank puller flywheel/clutch holder and case splitter.. then installing the bottom end kit.

 

[BLASTER 02]

Seems to be the piston exploded and pieces are in the bottom end. Heres a pic of the damage. Looks like a piece got between case wall and crank and carved it up a bit. Advise?

http://s1158.photobucket.com/albums/p601/Dennis2169/?action=view¤t=557926f0.jpg&evt=user_media_share

 

[shawnsadler]

i have some stock parts for sale.. what are you lookin for?... i have a clutch basket also if your's is no good.

 

[BLASTER 02]

i already bought a clutch basket thanks any way and ill pm you later what i need im not home

 

[1995blaster]

Looks good, like to see what it looks like done.

 

[BLASTER 02]

Just sent the head and jug to get the head mod and a hone/bore from ken oconnor. Then i will be doin his diy porting. Will have pics when i get it back.