okay i ripped my motor off and put a new crankcase on and all new gaskets and seals and bearings because my case was broke and i had an air leak somewhere causing the blaster to idle very high, i got a wiseco piston and rings put in and bored it out 20 over and it was idleing good for about two days then it started the high idle again, and i noticed my carb was leaking gas so i changed the gasket at the bottom and it still did it and i messed with the idle screw turned it down alot and it idles now but everytime my throttle cable gets pulled on or anything like even when i turn the wheels it starts to idle high again then when i put the wheels straight it goes back down anybody know what it could be?:-/