Will this carb work with my mods?

[Budget_Blaster]

Ive decided to throw my kdx together and will be using the 35mm keihin pwk i have that was destined to end up on my blaster.

Anyhoo ive found another 35mm keihin off an old cr125 dont know the year but the numbers on it are PJ 08AAAJT will it work on my blaster and are parts readily availible such as rebuild kits and jets and so on?Id hate to put a relic on here i cant get anything for.

So what are your thoughts and opninions on this carb with my mods?

Also temporarily id like to mod the stock boot if possible to except the 35mm is it possible if so what have you guys used and done to accomplish this?

 

[Budget_Blaster]

Also been thinking about this one but am unsure if its overkill for my setup?


Mikuni Geniune VM 38mm 38 mm Round Slide Carb Carburetor VM38-9 | eBay

 

[1995blaster]

a 35mm carb seems to be right were you would neeed, a 38 on the other hand would work but kill your bottom end. I would stick with what you got if you can get parts for it and the only way to tell is start checking for parts online just try to see if there out there.