will drums still bolt up with aftermarket a arms

[blasty 95]

I was wondering if drums will still bolt up with aftermarket a arms cuz idk where u can get disk brake conv.kit since project blaster doesn't make them anymore

 

[Prime]

Depends on the a-arms you get. You just have to make sure the 88-02 spindles will fit on those a-arms.

 

[cole454]

Yamaha Blaster Hydro Front Disc Brake Conversion Kit | eBay

Otherwise you'd have to try to find longer cables.

norman420 is a member here btw.

 

[blasty 95]

Oh do u no which ones work with 88-02 spindles

 

[cole454]

Oh do u no which ones work with 88-02 spindles

If the arms are made for blaster spindles they will fit any spindle with the exception of the 88.

 

[blasty 95]

Do they sell longer cables?

 

[sicivicdude]

Generally cables will reach because yamaha included quite a bit of slack. Hydraulic lines generally will not reach....

Side note, the 1988 blasters use the pinch bolt style lower ball joints. A-arms could be manufactured to accomodate the pinch bolt style spindle OR you could get later model blaster spindles and "regular" blaster extended a-arms.