Widden and Extend

[ZeroTolerance]

Hey Guys i have a quick question i wanted to know the easiest way to widden and stretch a blaster i would rather a easy bolt on vs re-fabbing a rear sway bar.

 

[cam6489]

They have a +2 Swingarm extension on ebay 60 bucks direct bolt on

 

[007blaster]

If ya wanna kill yourself buy that, do it right and buy an extended swing arm and a arms....not the widening kits on eBay. Trying to save a few bucks will get you hurt.

 

[Blaaster]

If you are on a budget there is nothing wrong with a swinger extension or wheel spacers or a widening kit to make it wider.

The best way of course is a extended swinger and axle on the rear and A arms on the front.

 

[ZeroTolerance]

Yea i have been looking at just getting extended swinger and axle then a arms next, just little by little i wana do it right .

 

[Blaaster]

My lad runs a Diamond widening and lowering kit, all works just fine.

 

[phragle]

If your serious about a bolt on widening and extending setup, buy my blue chassis, bolt your motor in and you have beyond achieved your goal.

 

[PRChrist]

what about the banshee axle

 

[Sauce440]

I have the extension kit off of ebay. works just fine,holds up real good. The banshee axle will fit right in if you have the new style brake. you have to do little modding with the hydro brake.