Who needs a set of cases?

[sicivicdude]

I have a set of cases which I've repaired and now it's time for these cases to find a new blasty home.

The repairs were fairly intensive... The case saver area on the left needed a fair amount of remodeling and the oil drain plug on the right side had to basically be completely removed and replaced with all new weld and then re-tapped M12 x 1.5. The good news is, everything is back to 100% and ready to be used with a few notable exceptions. It's missing the output shaft bearing and seal and it needs new crank bearings (really recommended anytime they come apart). For a fee, I could install new crank bearings and seal before it leaves if you're going to be pressing this into service immediately and the output shaft bearing and seal can come out of your busted cases.

Doesn't include any "guts" other than case bearings and the other seals.

I can take pictures for anyone who's in need once my camera battery recharges (stinking li-ion batteries GRR!)

$100 shipped!

 

[1995blaster]

Good deal and seller hered he know his stuff.

 

[sicivicdude]

Pictures of the actual set of cases I'm selling. You can see a fair amount of remodeling around the oil drain plug hole. No worries though, it's still a M12 x 1.50

 

[88' blaster]

can you trench them for a bigger crank?

 

[OConnor Racing]

Nice job on the repairs Civic. They look great.

 

[sicivicdude]

can you trench them for a bigger crank?

VVVVV talk to that guy, he'll hook you UP! He's got the milling machine and boring bar... not I

Nice job on the repairs Civic. They look great.

Thank you sir. This set of cases was kind of a "practice set" for working out the kinks for the welding and refinishing. I think they turned out well enough to use so I figured someone with some really bad cases could use them.

I'm open to offers, trades, heck pretty much anything.... try me!

 

[merlin1]

any chances of sending to the uk with extra shipping, also i am fitting a vitos crank at the same time do i need to modify them cheers chris.

 

[sicivicdude]

I wouldn't have a problem shipping them internationally but I would have to figure out how much extra shipping would be.

Are you fitting a vito's +3 stroker crank?

 

[merlin1]

If you can get a price and include the crank bearings and seals and. See what it all works out my address is mounts bay ludgvan leaze penzance cornwall england tr20 8aa cheers chris

 

[merlin1]

Sorry yes will be fitting vitos +3 crank

 

[sicivicdude]

PM sent!

151515

 

[sicivicdude]

Cases are sold.

Thanks Merlin1, I'll order bearings and install when they arrive (should be a day or three, not too long). I'll let you know when they're ready to ship.