where do get new axle carrier and swing arm bearings? Help Please

[sam0840]

hey guys, i have a +2 Lone star swing arm. its used but i am going to fix it up and make it look sweet again....anyways, i need to get some new needle bearings and possibly get a whole new axle carrier. the problem is i can't find one for the blaster SA on lone stars web site or any where on the web for that matter. if you could point me in the right direction i'd appreciate it. oh yea its the round housing design...its the pic in my profile incase you need to see what it looks like

 

[djack12]

your going to have to call them directly. get ready to spend cash!

 

[daniel3877]

lonestar is some expensive stuff...its gonna cost you some cheese but it'll be worth it ....

 

[sam0840]

well...can you get a replacment carrier that will fit that swing arm that is not lone star brand? lol yea i know their not cheap but i got the swing arm used for about an 1/8 of what they cost new. there really isn't anything wrong with the carrier its just chewed up by the adjustment holes because the dude chain broke...thats where the damge came from...you can kind of see it in my picture...i'll try and get another one up of it thats more clear.

 

[wolf1]

check with Camshafts, Air Filters, Big Bore Kits, RJATV Spring Hill, FL (352) 293-3593 John most likely can get you a direct replacement bearing kit from "allballs"

 

[djack12]

who cares then. it would be cheaper to clean it up and either paint it your self, of powder coat it.

 

[sam0840]

yea thats what i am doing for now....its just in a touchy spot because if i remove too much material there will be less of a lip on the carrier to hold on to the housing. i also need to strip all the powder coat off the SA. anybody got any tricks? i've tried some stripper. it takes the clear coat off great but that powder coat is still hard to get off.

 

[regal81455]

yeah sam, when you bring it over we will bake it off...