Whats wrong with my Blaster?

[dutram24]

I start it up, and go to give it gas and it just bogs out and shuts off.... Cleaned the carb really good, new spark plug. What could it be?

 

[scotj77]

what year? do you still have the big tors box on top of your carb? if so is it still wired?

 

[EZRider76]

I start it up, and go to give it gas and it just bogs out and shuts off.... Cleaned the carb really good, new spark plug. What could it be?

Bad fuel, bad fuel delivery, bad stator not delivering good spark to the plug, something clogging your exhaust, an air leak, too much fuel fouling the plug (pull it and check it), did you turn the fuel back on? Those are the first things that come to mind.

This is a badly fouled plug that will make the engine run rough and possibly stall...

 

[dutram24]

what year? do you still have the big tors box on top of your carb? if so is it still wired?

2000 and im not sure about that.

 

[scotj77]

if it is still plugged in try unplugging if and see if it will run

 

[EZRider76]

2000 and im not sure about that.

Take photos of the engine and we can tell you in a heartbeat.

 

[blasterdemon7]

Delete the TORS. Do a compression test and leak down test.post your readings when done.

 

[dutram24]

Bad fuel, bad fuel delivery, bad stator not delivering good spark to the plug, something clogging your exhaust, an air leak, too much fuel fouling the plug (pull it and check it), did you turn the fuel back on? Those are the first things that come to mind.

This is a badly fouled plug that will make the engine run rough and possibly stall...

i dont think its bad fuel we drained it and put new fuel in could be a stator im not that good with atvs so im not sure. checked the exhaust isnt clogged and dont believe the plug is fouling or an air leak

 

[dutram24]

Delete the TORS. Do a compression test and leak down test.post your readings when done.

not sure how to do this, im not good with engines

 

[blasterdemon7]

not sure how to do this, im not good with engines

All the info you need is on this forum. Just start reading up.

 

[scotj77]

just start off by deleting the tors. that is ez enough and it can be located in the do it yourself section. then report back if you still have the problem. one thing at a time

 

[dutram24]

just start off by deleting the tors. that is ez enough and it can be located in the do it yourself section. then report back if you still have the problem. one thing at a time

i could not find this, and im sorry its a 2003 blaster

 

[scotj77]

so it has hydrolic disc brakes and the same hood as mine?

 

[scotj77]

http://www.blasterforum.com/do-yourself-20/how-remove-your-tors-655/

 

[dutram24]

so it has hydrolic disc brakes and the same hood as mine?

mhmm and the 10th digit is a 3

 

[scotj77]

ok. In that link are the instuctions you need

 

[dutram24]

ok. In that link are the instuctions you need

ok thanks. and you suggest removing this?

 

[scotj77]

yes it is a piece of garbage. It just messes things up. if you stick around here you will notice that everyone has it deleted

 

[EZRider76]

almost everyone removes the TORS, it causes more headaches than solutions.

 

[dutram24]

yes it is a piece of garbage. It just messes things up. if you stick around here you will notice that everyone has it deleted

ok thanks guys ima go take a shot at it... might call my buddy first