I have a set of Maxxis Razer's on my blaster. I'm trying to get it ready to go for my first riding trip this weekend and want to verify that the tires are set to the correct pressure. On the side wall of the tire it says to see owner's manual for what pressure to run them at. Problem being I dont have a manual=)) I wondered what everybody else ran for a tire pressure in these perticular tires for general trail riding. Thanks for the help!
What tire pressure
- Thread starter customt2
- Start date
aha, i need to know this aswell, no idea what my tyres are, but heres a pic of the quad..where i go is tarac/mud/gravel, its an old quarry basically..all help appreciated thanks!
it does say max tyre pressure 7psi..but i dont think i should need it ful? someone help cheers
it does say max tyre pressure 7psi..but i dont think i should need it ful? someone help cheers
air your tires up to whatever works best for the kind of terrain you are riding. I ride alot of rocky/dirt hills so I have to air down a bit to keep the traction good. If you ride MX you wont have to have your tires aired down as much as me.
Yea i have my rears set at 5psi and i get good traction on all surfaces and i have my front set at 10psi just to make it turn easier...and not to mention when my fronts were set low i lost alot of tread quickly.
the back tires on mine are at 5 and the fronts are up and down as they leak alot and i have to fill em up often.
ah i cant, there the stock tires from 88 there just cracking up real bad haha.
ill get some new tires
ill get some new tires
i pump mine up just untill their flat on the bottom, dont put to much in the holeshots because they are ment to be flat and they will not work as well/wear in the middle
Similar threads
