What i need atm.

[luk3x3]

Clutch pushrod assembly with the ball in it

actuator arm

seals

gasket kit

and piston with rings. (not sure if im going to keep it stock or bore it out yet, so the benefits would be nice to know)

there may be more as time tells and we get the whole shebang apart.

 

[itstyler]

Clutch pushrod assembly with the ball in it

actuator arm

seals

gasket kit

and piston with rings. (not sure if im going to keep it stock or bore it out yet, so the benefits would be nice to know)

there may be more as time tells and we get the whole shebang apart.

Your better off only boring it wen you need to, your not going to get any noticeable power even if you go all the way to 68mm.

I have the actuator arm, and i think the push rod and ball. And i just ordered a bunch of gasket kits im giving the base gasket from one to blasterbruce if you want the rest of that kit ill give it to you at cost.

 

[89blaster89]

you boring adds so little power you dont even notice it

 

[luk3x3]

Your better off only boring it wen you need to, your not going to get any noticeable power even if you go all the way to 68mm.

I have the actuator arm, and i think the push rod and ball. And i just ordered a bunch of gasket kits im giving the base gasket from one to blasterbruce if you want the rest of that kit ill give it to you at cost.

how much you lookin?

 

[luk3x3]

update


just got an actuator arm. still need everything else listed.

 

[mud runner]

you boring adds so little power you dont even notice it

when we bored mine 40 over i could feel a noticble diffrence in power

 

[scotj77]

tht is just because it's a fresh bore. if you ran it on a dyno it would barely be noticeable from one fresh bore to the next

 

[wwholden]

I have the ball for sure, and at least the inner push rod. May have the one on the pressure plate but not sure. I can check tomorrow morning. I also have a stock plie of good used gaskets. PM me your cell number and ill send pics / work out a deal. I also have a Wiseco 67.25mm piston if that was the right size you need.