hello fellow atv riders. im in r.i. any ways my daughter has a 2006 blaster chain blew hole in case, i got new case am ready to put back together. when cases r together with 1/8 of inch space the crank and tranny main shaft spin freely but when i put bolts in and close completly the crank and main shaft do not spin, uggg. there is no debris or any noticeable things binding it. its my first time splitting cases all gears 1 thru 6 r there when i manually shift thru. if any one has any info that can help my 12 yr old daughter get back into trails please send reply. THANK you for any info.
ugg putting cases back together
- Thread starter banshee rider
- Start date
Pictures of the cases open would help. I can tell with near certainty where the problem is but pics would be nice.
The input shaft needle bearing has to be driven beyond flush into the left side case of the whole assembly won't move. The rest of the bearings are driven flush against their stops (so you can tell they're right).
The input shaft needle bearing has to be driven beyond flush into the left side case of the whole assembly won't move. The rest of the bearings are driven flush against their stops (so you can tell they're right).
hey bo thank you for your reply i will check on that later. 3rd time opening back up well 3rd times a charm
i like what civic is saying, considering thats what ken and i found was the only thing wrong with that motor i bought last week
that bearing either wasnt put in far enuf or had worked out
are you using a puller to pull the crank into the bearing/case ????
that bearing either wasnt put in far enuf or had worked out
are you using a puller to pull the crank into the bearing/case ????
I made sure to check the fitment of my alignment pegs when I did mine this time. I swapped them out till they would slide in perfectly.
whats up awk thanks for info i used a puller to seperate cases but to put them together i was able to get cases close enuf to where case bolts were able to grab and pull cases together. wow i put a period sorry for run on sentences and lack of puncuation guess thats why im a union laborer and not english teacher
any more responses will b appreciated. dam all your blasters look like they would give my banshees a run for their money. MODIFY EVERYTHING WOOO
theres your problem, you need the crank puller to seat the crank into that bearing, the screws should never, and prolly will never seat that correctly !!!!! and may crack the case
they make a crank puller for a reason
check with blansheeman, he's in NH. and bought one from me, maybe you could borrow it ?????
http://www.blasterforum.com/members/-blanshee-man-2540/
Last edited:
