Ditch that china carb before you fry it, 135 main sounds like a scooter carb.
put the stock carb back on it, ZERO other carbs come with the jetting required by a blaster.
set float height 20-21.5 mm....
https://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/
32.5 pilot, airscrew at 1.5 turns out to start, tune 1/4 turns +/- to find highest idle, allow 15 seconds between turns.
stock needle/middle clip position #(?)
230 main jet (stock pipe/filter/airbox lid on) any mods will need main jet increases
