Trenga Brakes

[#1Blaster]

I hate to start another topic if it has already been asked, but I think I might be missing a part. I bought a used trenga brake conversion off ebay and I think it is kinda hokie the way my brake lever hooks into the brake solenoid lever. Tell me what you think.

 

[pittboss45]

It sure does. Good luck with those.

 

[HOBBYHORSE]

Now that's quality right there!!!

 

[01blasterdude]

Either your missing something, or the engineer who made that conversion was missing something!

 

[#1Blaster]

I am really confused now!!! What am I missing? If someone has a trenga back break conversion, could you take a pic of the connection between the solenoid and the brake lever and email it to me or post it.
Thanks

 

[pittboss45]

All it was was a piece of tubing with a hole drilled thru it so a threaded rod connects the 2 together and the nuts were there to adjust it. What you have just might be a fix for those go cart brake set ups.

 

[#1Blaster]

Thanks, Does anyone have a pic of what they have so I could configure mine to function better.

 

[Stagesrt4]

i have the trenga rear brakes. Im not sure what im looking at in yours though...

let me see if i can find pics

 

[Stagesrt4]

sorry this is the only pic i have on me...

 

[#1Blaster]

I can kinda figure out what goes there from the pic.
Thanks.

 

[Stagesrt4]

no problem. LMK if you need more and ill see what i can do.

 

[#1Blaster]

If you have a pic of the conector arm connected, that would be great.
Thanks