Throttle bogs

[tippmann98]

I just bored up my new blaster it has a FMF fatty and power core 2 when I start to take off it kinda bogs down do i need to re jet it?

 

[super noober]

hows it run after you get going? have you completely cleaned everything and tried a new plug?

 

[TechBlaster]

I just bored up my new blaster it has a FMF fatty and power core 2 when I start to take off it kinda bogs down do i need to re jet it?

Bogs down like gurgles/feels rich/hesitant or falls flat on it's face??
Was there carb work/changes during the top end job?

Reeds possibly affected/not seated right/damaged after install/break in?

 

[tippmann98]

once its running its balls to the wall but its just taking off in first i cleaned the carb after the top end build but thats it

 

[Blaster200boy]

Whats it jetted to??? Supposed to be a 280 i think....you'll just have to do a plug chop...

 

[Brute71]

if you didnt re jet the carb after putting on the pipe, i'd do that before you blow up your engine. I believe the FMF calls for a 280 main.

 

[tippmann98]

ya it has been rejetted after the pipe it has the 280 main but do i have to rejet it after the bore up

 

[brandoz28]

not unless it was jetted incorrectly, if the plug looks good, then leave it alone.

 

[Blaster200boy]

What size pilot is it??? If its stock its gonna be a 32.5....turn the a/f screw all the way in, then back it out 1.5 turns....that might solve your problem....and what clip on the needle are you running??? I'm 2nd from the top....thats what most are i think....correct me if im wrong guys...