Stock to 14/40 gearing.

[Unstock240]

I ordered a 14 front sprocket. My carrier has about 1 inch to move forward towards the engine, will that be enough to get away without replacing the chain? If not I will wait for my +4 swing arm then do both.

 

[coreyownz]

this question doesnt realy make sense in my head but i think i got it now ur worried the 14tooth will take up to much chain? u should be fine its only an extra link? loosen the chain take off the sprocket pop it back on and retighten the chain

 

['blanshee'man]

that should be plenty but i would wait if ur gonna be gettin the +4 soon. jus to save time

 

[coreyownz]

yo blanshee what u ever do with ur dynoport? nice headlight thing lmao pm me bout pipe

 

[Unstock240]

If I wait I'll toss the o-ring chain because they are useless.

 

[Valhalla]

you run a risk of breaking that chain once you put a used chain on brand new sprockets. beware of that, its a really dangerous thing to do if the chain is too worn out.

 

[blaster biotch]

14 tooth will fit chain if its stock chain. but yes be careful because i broke a chain with my new 14tooth luckily it only destroyed the cover!

 

[Unstock240]

The chain has been well greased since i've had it. I'll take it easy the first few rides until the rollers break in though.

 

[blasterfreek30]

if ur getting the +4 swinger, dont forget about the +4 brake cable u will need too

 

[Unstock240]

I have the motion pro +4 on now, its arched like a rainbow on the stock swing arm but no binding haha.

 

[blasterfreek30]

ur one step ahead thenI:I