stator cover
- Thread starter xNOLOVEx
- Start date
I take it you're talking about a mod you've seen somewhere? Wire it to your light switch, just make sure your total wattage isn't over 50.
Yes i am, Its on here in the (mod your quad) group. I just dont know where to run the wire to on the quad.
cause also i might put the wally world headlights with 20 watts. But i dont yet i dont ride much at night so i have no lights
but any help i would much appreciate thanks.
If your running wallys you will only have about 10 watts left to use cause tbe wallys take 40 unless you do LEDs
what color wires do i hook them up to?
i havent done lights before my blasty has no head light or tail light, thinking of putting wally world headlights on to, but i dont do much riding at night.
Maybe do some research and study the Blaster Wiring Diagram ? you may be able to learn something ......
Yellow/red from the stator is power.
Blue from switch is rear.
Yellow is high beam.
Green is low beam.
Black is common.
Blue from switch is rear.
Yellow is high beam.
Green is low beam.
Black is common.
