sprocket hub

[JohnJr30236]

I've either stripped the splines off the hub or the axle. Will the hub off an 04 fit on my 99?

 

[yb200]

yes it will fit.......

 

[JohnJr30236]

Thanks. Now how do I remove it?

 

[blasterdude14]

i could be very wrong but if im right i belive you remove the hub unbolt the sprocket and it comes right off

 

[JohnJr30236]

The sprocket itself does unbolt. But the hub is still held onto the axle by two big nuts.

 

[JohnJr30236]

I need to get the hub itself off (green arrow) Do I do this by somehow removing those nuts (red arrow)??

 

[DUALSTROKE]

You got it.You need to remove both of those axle nuts and the sprocket hub will slide right off.Put a wrench on both axle nuts turning the outside one counter clockwise and the innner clockwise.Once it loosens remove them both counter clockwise.Reinstall them the opposite way.Basically you need to lock them two nuts back together.If interested I have a blaster axle and sprocket hub that I will sell.Good luck

 

[JohnJr30236]

You got it.You need to remove both of those axle nuts and the sprocket hub will slide right off.Put a wrench on both axle nuts turning the outside one counter clockwise and the innner clockwise.Once it loosens remove them both counter clockwise.Reinstall them the opposite way.Basically you need to lock them two nuts back together.If interested I have a blaster axle and sprocket hub that I will sell.Good luck

Will try it in the morning. Any idea what wrench size I'll need or if there's a better option? Also, once I determine what parts I need, I'd definatly be interested.

 

[yb200]

pipe wrench always works for me

 

[07EigerRider]

I bought 2 really big crescent wrenches from harbor freight fer i think $15 fer both

 

[07EigerRider]

I mean per. $15 per

 

[DUALSTROKE]

Same here,I use 2 very large adjustable wrenches that I bought for $20 a piece.A pipe wrench will work also but will most likely leave some of the tools jaw marks in it.You can always wrap some tape around it to soften the marks.

 

[JohnJr30236]

thanks for the help. i will hit up the tool store this morning and let ya know how it turns out

 

[JohnJr30236]

Should I grease the splines when putting it all back together?

 

[yb200]

little grease never hurts.........

 

[JohnJr30236]

2004 sprocket and hub on its way from ebay for under $20 shipped