side cover

[hoerter2158]

Im taking the side cover off my Rm125 to put in new coolant pump seals. The cover wont budge. I have all the screws out, the radiator lines off, and the cover wont come out.

any ideas?

 

[B14573r]

idk but not to be rude but this is a blaster forum, hence the name

 

[flyers42091]

Idk about getting it off except prying on it with a screwdriver or something. And btw, theres nothing wrong with asking questions about other quads and bikes you own. Just don't make a habit of it.

 

[oscaryu1]

WD40 it, and see if you can see on the other side. If all is clear, probably it's just a bit stuck. If it's still stuck, slowly try to pull it out...

 

[randelator]

hammer it with a rubber mallet

 

[01blaster_freak]

Deff use a rubber mallet an tap around where it connect to the bottom end at, this should break it loose. If you do have to pry on it do it very lightly while hitting the cover with the rubber hammer to much force an you will f*ck up where the gasket goes which means it wont seal up right an you'll have a leak.