Hey guys this may be a stupid question but couldn't find any results. Does cold weather (14 degrees here) have any effect on sealers? I put new reeds on my vforce3s with a new gasket on the intake boot/ reed side and on the cylinder/reed side with a light coating of Threebond 1194 on all surfaces. I torque the 4 bolts to the 5.8ft lbs and have the next few days off so I will let it cure til monday. It is supposed to slowly warm up the next few days. Wasn't sure if cold temps effect curing and wanted to know before I do a leakdown. Thought I read somewhere threebond is an excellent sealer to around -40 Celsius .
Thanks guys
Nick
Thanks guys
Nick