i have a set of douglass shamrock beadlocks in HONDA bolt pattern 4x144 and they are 4 on 1 offset. tires size is 20x6x10 maxxis razr's with good tread. i also have the rpm conversion hubs that fit on a yfz but can be made to work with the blaster. i will also throw in a set of yfz 450 spindles so if you have some after market arms you can run a upper yfz balljoint and run the yfz spindles, hubs and wheels. you can also make these work with some norman420 conversion spindles by adding a small spacer before the inner bearing. yfz spindles are shorter than the conversion spindles so the spacer is neccesary. the hubs will need new seals, the bearings still feel pretty tight. the hubs and beadlock rings are powdercoated blue, they have the usual nicks and scratches and come with the rotors
360 shipped the hubs alone are over 300 new.
360 shipped the hubs alone are over 300 new.
, they will work with norm's conversion sindles
