revs high help

[blaster911]

i got my blaster bored 20 over rubuilt it, drivies fine but wount idle and when the choke is out it reves way high, and there is no leaks coulde it be needle clip postion. thanks for the help

 

[89blaster89]

i got my blaster bored 20 over rubuilt it, drivies fine but wount idle and when the choke is out it reves way high, and there is no leaks coulde it be needle clip postion. thanks for the help

when the choke is out i think its normal to rev high

 

[blaster911]

but it revs where you have to shut it off so it dont blow but when you push the choke in it wount idle

 

[Awk08]

sounds like it's time for a proper carb cleaning........
http://www.blasterforum.com/carburetor-138/how-clean-your-carb-pics-209/

possibly a carb rebuild.....
Yamaha YFS200 Blaster 88 95 Shindy Carb Rebuild Kit | eBay

a float adjustment......
http://www.blasterforum.com/carburetor-138/float-heights-how-adjust-them-50565/

and airscrew adjustment........
http://www.blasterforum.com/carburetor-138/adjusting-your-airscrew-pilot-jet-51060/

 

[Blaaster]

What were the results of the leak test you performed after rebuild?