rear hubs

[mudworld]

don't know if any has tried this but 09yfz rear hubs give you about a 1 1/2" more width and bolt on a blaster need 4x115 wheels
i had to edit put wrong lug pattern but it is 4x115 my bad

 

[musselman]

They won't fit on a stock blaster axle since they are longer. There won't be enough thread protrusion to thread the nut on.

 

[yb200]

They won't fit on a stock blaster axle since they are longer. There won't be enough thread protrusion to thread the nut on.

look at the pic numb nuts the part that slides on the axle is the same length I:I

 

[slickerthanyou]

That's good to know! +1

 

[slickerthanyou]

look at the pic numb nuts the part that slides on the axle is the same length i:i

haaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa!

 

[royalt67]

Alright, good info! I hope somebody slips this into one of the stickies for cheap part swaps (assuming you can get them cheap, extended blaster hubs are $89 on ebay). People have been putting on Banshee hubs for years, to make use of a wider selection of wheels, etc, but they aren't any wider. +5 rep

 

[musselman]

look at the pic numb nuts the part that slides on the axle is the same length I:I

Oh yah, I didn't zoom in on the pic, I guess they should fit.

No need to be a f**ing dick about it.

 

[mudworld]

finding them cheap is going to be a little tuff, found mine on ebay for $28 don't know what year they started with this style hub

 

[98blaster+4]

Oh yah, I didn't zoom in on the pic, I guess they should fit.

No need to be a f**ing dick about it.

yeah man no need to be such a dink all the time yb. you'll catch more flies with honey......and if ya dont like it then lick the underside of my nuts

 

[justtwistit]

apparently 09 was the first year for it cause i just looked on ebay and one ad said theirs would fit 04-08 and it was not extended any

 

[brandoz28]

if they really use the 4/110 wheels then you use honda wheels, and that means cheap beadlocks!!!! you can get cheap wheels for hondas all the time

 

[mudworld]

now that is good to know, I got some itps from a friend off of his banshee

 

[mudworld]

that was my bad the lug pattern is 4x115 not 4x110

 

[mudworld]

if they really use the 4/110 wheels then you use honda wheels, and that means cheap beadlocks!!!! you can get cheap wheels for hondas all the time

thanks for making me double check this

 

[brandoz28]

if you have banshee wheels you can use banshee/rappy/warrior rear hubs to bolt them up

 

[blasterdemon7]

yeah man no need to be such a dink all the time yb. you'll catch more flies with honey......and if ya dont like it then lick the underside of my nuts

Sorry YB but that's to f'ing funny!!!!