rear brake help needed

didnt work like that for me! would it be seized? i also took off that white cap and put wd-40 down into it

yea bro its siezed..that what i said in a previous post..lol if it dont turn..its siezed. let it soke in anti sieze spray or ALOT of wd-40.. then put some vise grips on the end and try to break it loose.
 
rite! so i let it soak and is now free!
except another problem! it wont release it just sticks!
i tryed loosening the allen bolts but still didnt work
any ideas now?
thanks
 
glad u got it free without snapping it...like i did mine..lol now the brake pad wont release back towards the housing?

1st take the gut out of the housing and the pads. SCRUBBBBB the dirt,mud ect out of the hole where the pads slide into..you wanna make sure there really clean and smooth. Clean the pads also..make sure the outside of them are smooth.

2nd make sure ur spring is working by the foot brake so it isnt keeping it contracted.

3rd there should be ZERO kinks in the break cable from the foot brake to the caliper. it should be straight.

4th it that dont work put a match in the gas tank and say FK it! lol.
 
i got mine all cleaned up no to just sticks when i hit it....then i can tap on the caliper and it breaks free...prolly gunna take it apart again and clean it again.....never ending
 
im about to explode with frustration!!
it seemed to be way freer without the seal so i put it in without the seal and still wont realese! ! ! ! ! its becoming a pain in the hole! :(
 
good idea! would a cheap 1 do?? i also thougt about buyin a shee one!
ony prob is there isnt many parts up on ebay here! and if i was to buy from us dey wud kill me with costom fee's!:(