R6 rear brakes on Blaster

Well , I looked at the R6 brake caliper ( one on ebay for $8.00 ) and its a single piston caliper , so that makes it a lot harder to make it work with the blaster . What a lot of us here do is get a 1995 1996 GSXR rear brake caliper and make a mount for it . Its a dual piston caliper wich means that it squeezes the rotor from both sides , so there is no pin sliders for the caliper to adjust as the pads wear . Its 100% easier to set up .
couple of pics of my set-up
48888823.jpg

753a3417.jpg

The bracket was made from 3/16" steel plate and cut with a plasma cutter , it can be cut with a jigsaw with a metal blade , will just take longer . the master cylinder and reservoir is from ebay off a cr125 dirtbike . and the caliper is from a 1996 gsxr 750 . and the extended rear brake line is from American Star Racing ( they make tons of blaster parts )
 
Last edited:
Thanks for the reply I am going to look into some type of rear brake set up the stock suck.
 
thats an 04/05 gsxr caliper not 90 sum, pm me and i'll show and tell ya all you need to know, i've made close to 30 of these set-ups