Quick jetting help

[nathan bickom]

I got my son a blaster for Xmas. So I g some work on it befor I give it to him. I added a k+n filter, removed the air box lid, Boyesen reeds, and a toomey muffler with stock pipe, removed tors and did an oil injection delete. Where would be a good starting point for jetting. It had a 230 main, I was thinking 250 but looking for any input. We ride between 0 and 3000 elevation. Thanks!

 

[Awk08]

0-3000 is quite the elevation swing.
You're going to have to jet for the 0 and live with it running rich @ 3000
(Carry extra plugs in case it fouls)

I'd start plug chops with a 260
Up 1 size each for k&n, lid off, injection delete. Reeds and silencer doesn't matter.

Look up, and do, plug chops in the carb section

 

[nathan bickom]

Ya it's a big range but where we live is sea level and our camp in tug hill gets up close to 3000. So usually jet for around the house and live with it at camp. Thanks for the info.