quad trying to cut out. HELP ASAP

[alex90]

ye i am going to try that coil and plug first
it has a iridium plug in it?
what are they like with 2 strokes?
its like i wack on full throttle and it takes ages to kick in.
hopefully changing them should sort my probelem

hmm supposedly the iridium plugs are a way of the future but i know nothing about em and your the first person i know that uses em.

run an ngk till you figure what the issue is br9eg is what i run, its not stock but me and phrangle confirmed its blaster safe and actually a slight improvement. try that and try different electronics till she works

 

[Blaster200UK]

thanks buddy , will try the after crimbo

 

[2smoker85]

switch to a br8es ngk plug, i ran iridium plugs and didnt like it, personally i could tell the difference.

 

[Blaster200UK]

thanks mate, all the help is much appreciated

 

[Blaster200UK]

i took the quad out again to see if it the problem had changed,
i fiddled about with it,
disconnected the electrics from the parking brake and the electrics to the front brake,
and shes fine now,
how would this affect it?

 

[alex90]

i took the quad out again to see if it the problem had changed,
i fiddled about with it,
disconnected the electrics from the parking brake and the electrics to the front brake,
and shes fine now,
how would this affect it?

this is the first thing i thought it was. the parking break has a safety switch and is to designed to cut out the ignition if it is depressed...yay! that means i was right... i love blasters because the problem is easily fixed for free

 

[alex90]

some dirt could of messed the switch up, or the wire began to fail..

 

[Blaster200UK]

yes me too, she just doesnt sound like shes kicking in as much as she wants to, as if someones blocked half the exahust hole up, im gunna take exhaust off tomorrow,
clean it up and repack it i think

 

[alex90]

make sure its not your piston in your pipe... ive seen that before

 

[Blaster200UK]

what do you mean piston in the pipe?

 

[alex90]

chunks of the piston have been known to chunk off and get caught in the pipe... happened to a guy on here. it still ran somehow lol dont ask me how, not tryin to scare you lol i was just kiddin around, thats like pretty rare to happen like that

 

[4cfed]

chunks of the piston have been known to chunk off and get caught in the pipe... happened to a guy on here. it still ran somehow lol dont ask me how, not tryin to scare you lol i was just kiddin around, thats like pretty rare to happen like that

i had part of the stock pipe break loose and rattle around never obstructed..

the stock ppe has screen and baffles in it

 

[Blaster200UK]

ah right, might have to upgrade that then