putting on grips
- Thread starter 89blaster89
- Start date
hmm how lng does the hairspray take to dry, i used to use saliva when i put grips on my bmx bike
depend on if they fit tight or loose. if they fit tight, soak the grips in hot soapy water for 10 mins then slipem on. if they are loose spray clearcoat or high hold hairspray.
Hair spray or spray paint, which ever is easier to get to. The more you spray, the longer it takes to dry.
GOOP.... the best glue on earth, IMO
will stay put as long as you'd like it too, but stays rubbery and will allow you to remove them when ready
Amazing GOOP Marine at Menards
will stay put as long as you'd like it too, but stays rubbery and will allow you to remove them when ready
Amazing GOOP Marine at Menards
X4 on the aqua net Hair Spray!!!!! good for keeping your grips stuck AND propellant for your potato cannon!!! its just sooo damn handy!!!
You will never use glue on grips after using this. >>> Odi ATV Lock-On Grips - Rogue | ATV | Rocky Mountain ATV/MC
thoes are gonna be my next grips i rode my neibors canam 650 that he used to mud race and i loved the grips because they would never spin and how i do it is put duck tape on the bars
whats the nickel for?
on my street bike i use my blowgun nozzle under the edge push em on (only works on new grips that still have the end cap)
grip glue,or spraypaint. compressed air low pressure 10 psi max, cap opposite end , put a small hole in grip end, put glue on bar, start the grip on, inflate the grip with blow nozzle slide grip on, release air pressure, let set, repeat other side.
