Pro Armor killswitch problem?

[strokeddemon]

My killswitch is holding current and shocking me when my hand touches the metal on the side. When i installed it the directions didn't say which wires wires were power and ground. Just had 2 solid black wires coming out of it. Curious to find out the issue and also could this be affecting my miss in 6th gear?

 

[DUALSTROKE]

This is not affecting your miss in 6th gear. You have the polarity reveresed on the wires. Swap them around and your problem is fixed. Just for reference: whenever installing an aftermarket kill switch the shorter wire is always the ground / common.

 

[strokeddemon]

Had no idea. Thanks. My miss i believe is from to short a fuel line just wasn't sure.

 

[DUALSTROKE]

Get that tranny cut and you won't have to worry about a 6th gear miss. lol

 

[Blaaster]

Had no idea. Thanks. My miss i believe is from to short a fuel line just wasn't sure.

I apologise for being harsh but what rubbish is this, a short fuel line causing a miss, what utter garbage.

The miss [if it has anything to do with fuel], is possibly and air leak, poor jetting, incorrect float level, filthy filter ect.

When was the last time you changed the spark plug.

 

[strokeddemon]

Everything is new. Jetting isn't perfect. Waiting on new reed gaskets and bigger jets right now. i believe i had an airleak with the vitos gaskets. Currently running a 170 main and plug comes out clean. Ported my vf4s while everything was out . Going to perform a leak down test when i get everything back together

 

[strokeddemon]

Bike was cutting in and out. Not exactly a miss. Ordering a new fuel line also just because its a little short for my liking.