Premix Oil?

[teamcrackitrace]

Hey guys. I'm new to Blasters and I just bought one and I was wondering, what kind of oil premix can I run in this thing? I have vito's big bore 240cc kit, vforce3 reeds, 30 mm carb with a 0.240 jet, lrd exhaust, cfm intake with a uni filter and too much more to list. I talked to a honda/kawasaki dealer and they told me I should be using 32:1. Is this correct? My second question is if it is 32:1, does it matter what kind of oil i use? They sold me fuch's silkolene i think is what its called. However, I sell Echo chainsaws and weedtrimmers and was wondering, could I use that for oil? I have a lot of older bottles of 32:1 mix I can't sell anymore and i dont wanna throw them away considering they're 3 bucks each. Does anybody use chainsaw oil? Thanks!

 

[blasterdemon7]

32:1 one is correct. Use a good name brand oil made for ATV's.

 

[jlsparky7]

32:1 if you use conventional oil, you can do 40:1 or even 50:1 with a good synthetic. My banshee topend lasted almost 5 years on 40:1.

 

[teamcrackitrace]

Thanks guys! And yeah that's what i figured i should do.... the guy at the honda dealer said the chainsaw oil may not have the same heat retention as atv oil would

 

[DirtDiggler]

Yeah chainsaw oil would be a fatal idea . Maxima Super M at 32:1 will keep that big bore real happy .

 

[jlsparky7]

Should be fine with the chainsaw oil as well, Just slowly mix it with better oil. No sense in wasting it.

 

[Racer51]

You can get Amsoil dominator premium race oil for like 10-11 bucks a quart tops pretty much anywhere and it'll make your engine last for damn near ever. what they said 32-1 is for when you use about anything else but I wouldent go any lower than 40-1 though good luck

 

[Larry's Shee]

Read this http://www.blasterforum.com/engine-13/pre-mix-ratios-myth-facts-read-14935/ Why is it that you can't sell the oil? Myself I mix 28:1.