I'm still running a oil tank and pump. Noticed today the corner of the tank cracked open and is slowly leaking out. Need a quick fix plz help
Plz help! Lol need a quick fix
- Thread starter Newtoblastys
- Start date
Best bet is to just convert to premix.. or try seal it with silicon for the time being maybe? not sure if that would work lol...
2 part epoxy for plastic, its usually in a black tube. that will work.
you need to cealn surface with a strong solvent, like denatured alcohol or mineral spirits, womens finger nail polish remover will work too.
ruff it up with some 220 grit sand paper and that will work fine 4 you.
the other way is with a a atv fender repair kit, its a small iron and comes with polyethene stick to fuse / melt / seal cracls in plastic.
ebay has them, but they not cheap.
so best bet is the 2 part expoxy for plastic.
Sporty
you need to cealn surface with a strong solvent, like denatured alcohol or mineral spirits, womens finger nail polish remover will work too.
ruff it up with some 220 grit sand paper and that will work fine 4 you.
the other way is with a a atv fender repair kit, its a small iron and comes with polyethene stick to fuse / melt / seal cracls in plastic.
ebay has them, but they not cheap.
so best bet is the 2 part expoxy for plastic.
Sporty
Auto parts stores sell a product that is ment to be used for sealing gas tanks. Basically you dump it in and slosh it around. Then is hardens like glass. Giving you a completely sealed solid inner surface.
Believe it or not a hard rubbing with hand soap will fill the crack and stop it leaking for a while.
Household soap is impervious to fuel and oil and will stop leaks for a long period.
Household soap is impervious to fuel and oil and will stop leaks for a long period.
