Please help on istalling fmf gold series pipe

[2strokep0wer]

Hey, I've got an fmf gold series fatty header pipe and a pro circuit silencer I want to get on my 04 blaster. What modifications do I have to do to get it running good? Like jetting, air filter mods..etc.
It has an aftermarket airfilter already on it but it's still foam. It's been rebuilt (piston and rings) soo I'm guessing it is bored around 10-20 over. other than that it's all stock.

Also I have v-force 3 reeds that I want to get on. Do I have to do any modifications to get those on?

Your help is much appreciated. Thanks

 

[yb200]

for the pipe you will need to rejet.....start with a 280 main jet and move the needle in to the 3rd clip

you may need to mod the vforce a little

check out this link

http://www.blasterforum.com/do-yourself-20/modding-vf3-reedcage-23766/

 

[blasterdude14]

You don't really have to do any mods, just change the jetting.
If the jetting is stock you want to get a main jet that is 2 or 3 sizes bigger

 

[2strokep0wer]

blaster stock jet is 230, I could be wrong though. Thats just what the manual said. And nothing with the airfilter has to be done?

Thanks very much for the replies

 

[blastermaster01]

Yes 230 is stock.. and nothing has to be done with the air filter.
all you need to do is rejet

 

[4cfed]

unless you want a little more added power than throttle responce, you can take the air box lid off and run 1-2 mains higher than just for apipe