ok so there is a throttle cable on my carburator and i dont know how to get it off and the only way to get the carburator off is to disconnect it and i dont know how to do that
okay i am about to freak someone help
- Thread starter JaronMoor#7
- Start date
You have 2 choices here:
#1 Turn the cap on the top off and pull out the slide
#2 pop the cover off your thumb throttle housing(4 phillips screws)
pop the end out and unscrew it right there, you might have to push back the rubber peice covering it
#1 Turn the cap on the top off and pull out the slide
#2 pop the cover off your thumb throttle housing(4 phillips screws)
pop the end out and unscrew it right there, you might have to push back the rubber peice covering it
but i still kinda dont get it there is like a throttle cable that is on the other side not the side that has the choke on it and i dont get how pulling the slide would disconnect that
are you talking about the hose going to the black cover on the front of the motor(right side) if so thats your oil injection hose, you will have to dissconnect the gas line, you can unscrew the cap on the top and the whole slide assembly will slide out, but be careful with it , wrap it in a cloth and put a lil tape around it and just leave the throttle cable with the slide on your quad.
yeah dude just pull that biotch off. while its off you should just throw it in the garbage and block it off and premix.
i recall someone saying before that you had to prime the oil injection. someone want to confirm or deny this? i just remeeber someone frying their engine and said they didnt prime the oil injection tube or some sh*t.
