is it possible? i found a universal kit online and it says u wire a switch to a live wire and then mount a bottle by ur airbox then a nozzle shots it down the throat of ur carb but its 800 bucks X(
nitrous oxide
- Thread starter Zwiser
- Start date
ohh that sucks.... its one of those things that u wish u cud just buy and see if it works... but 8 hundo.... man... it will probably work tho... as far as i know u can use nitrous oxide on anything with a combustion chamber
i run nitrous in my play car and have done DAYS worth of research......here are issues that i have with running nitrous on a 2 stroke motor (some specifically blaster)
1.) this is most important, is that a good nitrous tune is one that will clean up the plug and be pretty lean. you also need to build the motor with the intention of running nitrous, it generates a lot of heat so you need to open up the ring gaps, and we all know what happens to a lean/warm 2 stroke.......
2.) one of the big killers with a race motor on nitrous is oil control, when you get oil in the combustion chamber the nitrous basically mixes with it and creates similar to a blow torch effect. this is where pistons start disappearing
3.) fuel enrichment, you need more fuel when you run nitrous. you are going to need a fuel pump or something to get this extra fuel. this can be an issue because the stock stator isn't exactly very powerful.....on that subject you need a way to retard the timing, so an adjustable stator plate is a must
4.) cylinder pressure, if you're running a respectable dose of juice, you're going to have an issue with the nitrous actually blowing out the spark at the plug, so you're going to need to add some kind of high power coil and also put a good ignition on like an MSD....this is something that will take some know-how to do and once again draw a lot of juice.
and i guess i'm not sure what you want to use this for, its really not good for anything except drag racing
1.) this is most important, is that a good nitrous tune is one that will clean up the plug and be pretty lean. you also need to build the motor with the intention of running nitrous, it generates a lot of heat so you need to open up the ring gaps, and we all know what happens to a lean/warm 2 stroke.......
2.) one of the big killers with a race motor on nitrous is oil control, when you get oil in the combustion chamber the nitrous basically mixes with it and creates similar to a blow torch effect. this is where pistons start disappearing
3.) fuel enrichment, you need more fuel when you run nitrous. you are going to need a fuel pump or something to get this extra fuel. this can be an issue because the stock stator isn't exactly very powerful.....on that subject you need a way to retard the timing, so an adjustable stator plate is a must
4.) cylinder pressure, if you're running a respectable dose of juice, you're going to have an issue with the nitrous actually blowing out the spark at the plug, so you're going to need to add some kind of high power coil and also put a good ignition on like an MSD....this is something that will take some know-how to do and once again draw a lot of juice.
and i guess i'm not sure what you want to use this for, its really not good for anything except drag racing
All I have to say is BANG!!!!!!!!!! Cylinder porting is far less than an $800 bottle and you get to ride it more than twice.
if it were me, i'd stay away from it on the blasty. i have it on "one"drag banshee that i built for a buddy, (i sold him the kit) and only use it for a bad start off the line, it works well for that and only that. the motor is not built to run NOS all the time. BUT.....if you insist on putting it on there, the Boss Noss system is about the best wet kit out there. deffinatly pricey, but you dont have to purge the system, or heat the bottle. totally regulated. i'd still leave it alone though, because next thing you know you'll be hitting it all the time playin with your buddies and then BOOM, you'll be needing a tow back home.
theres this one kid out here has a tractor hes racing me. said itl do 70 o and he said hes puting on a 75 dry shot of nos. i said ok good luck blowing ur tractor up. my one freind goes wear a cavlar vest so when the pistion shoots threw the cylinder ur better off. why are ppl so stupid.
How about one where the tractor engine blows and then the tractor RUNS OVER IT! It seriously gets funnier every time I watch it...
Think about that going off between your legs... :-(
Think about that going off between your legs... :-(
Last edited by a moderator:
!!!!i!damn man nevr put nos on a flippin atv !!!! ( if you want the engine still mounted to the frame!
If you watch the video, the engine rips the block apart above the main bearing line and comes flying out. There was enough pressure above those pistons to rip the block!
oh yeah, nitrous on anything but an ALL OUT drag quad, bad idea.
oh yeah, nitrous on anything but an ALL OUT drag quad, bad idea.
Similar threads
