Hey guys,i just got my blaster today and i absolute love it.I have to get a nw piston so im gonna do it rite.im gonna do a 240 bore,port it to the max,put a 3 mill stroker in it,bigger karbs.this is gonna be a sand dragger.my machanic told me that that little stuff will put me at 40 hp but im still mad that they are so low on ho.so what im gonna do probavly is put a yz250 in it that make43 hp stock.may do a little mods to that.
Newb on deck
- Thread starter HARDCORE
- Start date
Blaner
Your Friendly South African Ambassador
Welcome! well it has been done--the 250 swap, but why not just get yourself a banshee and save all the hassle of doing a BBK then swapping the motor?
Blaner
Your Friendly South African Ambassador
yes but you are a hardcore 13 yr old...
lmao.//////////////////////////////////////////////
Also a few guys here have hit the low 5's and pushing high 4's in drag with blaster motors. That will beat most out there. Your 13 buddy, i can guarentee you that a fully ported,matched, blueprinted motor, with the correct set-up will do you quite fine!!
welcome man. you will love it here. and i thought of the yz swap. it would be pretty cool if u find all the stuff you need.
I have a+3 stroked ported matched, setup and it screams. I don't drag my quad. So I have no idea numbers wise, Pm strokedtater and supernoober, their the dragsters, they can give ya plenty of input.
