new to blasters and have white smoke

[stevie+]

hi all am new to blasters and 2 strokes. I bought a 2005 blaster last week and it has starting smoking i have found out on here that it might be crank seals is there a video anywhere to show how to change these any help is gratefully received thanks

 

[sicivicdude]

Do a leakdown test to confirm that the clutch side seal is the actual problem.

 

[jlsparky7]

Ill be doing a full bottom end disassembly and reassembly soon (within the next couple weeks hopefully) on my cousins blaster. Im busy doing a bottom end vid on my banshee right now. Subscribe to my youtube channel and you will get notified when i upload the vids. Link in my signature.

 

[stevie+]

thanks for all the reply's i will try and do a leak down test

 

[sicivicdude]

Is it using transmission fluid? If the white smoke is transmission fluid burning, the exhaust will smell very different than normal 2 stroke exhaust. It will smell like burning motor oil (or transmission fluid whichever you're using).

 

[stevie+]

Is it using transmission fluid? If the white smoke is transmission fluid burning, the exhaust will smell very different than normal 2 stroke exhaust. It will smell like burning motor oil (or transmission fluid whichever you're using).

yes mate it is using transmission fluid and it does smell different is it an easy job to replace the seals

 

[sicivicdude]

Changing the seals isn't particularly difficult and does not require a complete engine tear down. I recommend doing both sides together even though white smoke would indicate the clutch side seal is bad. It will take a flywheel puller , an impact screwdriver, and an impact gun with a 19mm and 22mm socket.

 

[Larry's Shee]

Also either get a manual or there is a download for one.

BTW, welcome !!

 

[cole454]

Also either get a manual or there is a download for one.

BTW, welcome !!

+1

Link to manual in my sig vvvvvv I:I