New and old

[slickerthanyou]

New never installed +4 crank w/wristpin bearing and shaved head won't go lower than $210 shipped- as I'm already takin a beatin as it is. Part #4105

Nerf bars don't know the brand came with the quad, will need re-webbed Thick aluminum no u-bolts had to cut them off. $60+shipping
One side

The other

I am in need of these items: Rear hydro kit, heelguards the metal ones, FMF full Exhaust/ Straight Set of Rims and/or Tires. Will also consider trading for needed items of equal value and/or cash.

 

[bag0b0nez]

how much for just the head?

 

[slickerthanyou]

how much for just the head?

$40 shipped. It cost me 50 to have it milled.

 

[brandoz28]

those look a lot like DG nerfs with the mounts for the webbing cut off

 

[Blasterb0y794]

those look a lot like DG nerfs with the mounts for the webbing cut off

The mounts are not cut off for the webs. Thats how those nerf bars are manufactured.

 

[bag0b0nez]

u still need tires? i have a good pair of stock fronts on yellow rims. and a good pair of stock backs on stock rims and a pair of holeshots that are ehh 45% tread. slite leak in the one. on stock rims. let me know if u would wanna trade for anything

 

[DirtDiggler]

Would you take $50.00 including shipping for the nerfs?

 

[ROCKSTAR]

The mounts are not cut off for the webs. Thats how those nerf bars are manufactured.

this is correct. some have the web mounts, some are wrapped and riveted, like these....

also i believe that head is rechambered. the dome looks to be cut. a milled head has the gasket surface cut, and the dome left untouched.

also looks to be setup to run pump gas.

? on the head tho....was it setup for the stroker crank or stock crank? stock cylinder or BB? that wasnt mentioned and is important info....makes a difference....

 

[slickerthanyou]

this is correct. some have the web mounts, some are wrapped and riveted, like these....

also i believe that head is rechambered. the dome looks to be cut. a milled head has the gasket surface cut, and the dome left untouched.

also looks to be setup to run pump gas.

? on the head tho....was it setup for the stroker crank or stock crank? stock cylinder or BB? that wasnt mentioned and is important info....makes a difference....

The head is set up for the +4 hot rods crank. Stock cylinder 68mm. last bore.

and .002 taken off the gasket surface. I have decided to go with the +3 I don't want to trench my case.

 

[slickerthanyou]

Would you take $50.00 including shipping for the nerfs?

Make it $60 i'll ship to you.

 

[slickerthanyou]

Bump for new pricing.

New Hot rods crank +4 = $130+ ship (the head is sold)

Used nerfs= $40+ ship

Used uni filter- good shape $15 shipped

Used Complete set of tranny gears $50+ ship

Jug Bored to 68mm with Wiseco piston kit $85+ ship