need some axle info/help

[yamablaster05]

finally got my g force axle but the sh*tty stock one is stuck in the barring carrier. ive sprayed it with pb blaster and banged on it multiple times and still didnt budge.. its only a 2005 it shouldnt be this bad. idk if im doing something wrong, i took whole axle/carrier off swingarm. hubs and wheels are off. only thing else i can think of doing is gettin the torch and heating that sob up. any input would help

 

[scotj77]

you have the axle nuts off right? the two big nuts on the left side of the carrier.

 

[yamablaster05]

yeah lol, just got done torching it red hot and beating the hell out of it. still no use so im letting some oil seep in for now and bang it somemore i guess

 

[scotj77]

that is def weird. it should have come right out. good luck

 

[DUALSTROKE]

Soak it in some penetrating oil and lots of it over night.Then tomorrow take a nice thick board 2x8 or so and lay it on a hard ground then install hub nut onto the end of the axle.Grab the carrier sleeves(where the bolts go thorugh) with your hands and slam the end of the axle down on the board.May take a little to get it to initially budge but this method has not failed me yet.Good luck

 

[scotj77]

sweet info dually