Need low end

[c_loz22]

How can i get the most low end out of a 99 stock blaster, on a budget. Where will i get the most bang for my buck?

 

[blasterfreek30]

a 12 dollar 13 tooth front sprocket

 

[c_loz22]

I could probably swing a bit more coin than that but thats where i'll start. thanks

 

[tyler1blaster]

yeah start there and then try gearing

 

[super noober]

yeah start there and then try gearing

ummmmm, isnt changing the sprocket considered gearing? lol jk I:I I:I

 

[blasterfreek30]

yeah start there and then try gearing

lol..........

 

[stephen12091985]

a 12 dollar 13 tooth front sprocket

if his blaster is stock is should already have a 13t front sprocket correct?

 

[schmidtsandwich]

if his blaster is stock is should already have a 13t front sprocket correct?

was thinking the same thing. bringing back a dead thread, what would be the next mod for low end? if anybodys got cheap 20"rears shoot me a pm
thanks
-Adam

 

[blasterdemon7]

Why are you bumping an old thread and throwing a wanted post in it at the same time?

 

[Braaaptor]

Aside from re-gearing, add an FMF pipe and re-jet accordingly. Toss the airbox lid as well. Might not necessarily be a "cheap" mod (the pipe, that is) but it helps a lot over stock. And before anybody goes to bashing FMF, remember that many of the short-track MX racers run them and win!

 

[Blaaster]

DMC Alien pipe, airbox lid, re-jet, 3-4 deg timing advance, 95-98 octane fuel, 12t front sprocket.

 

[super noober]

small front sprocket and bigger back sprocket