Need Help witch removing clutch basket and inner hub

[Michael0731]

i need help on how to remove the clutch basket and inner hub off my 01 blaster would be great if you show me a link to a video. do i have to remove the center nut, and if i do how i lock my bike so the gears wont spin.
or do i have to take apart the engine to remove it.


blaster.jpg picture by MichaelValcarce - Photobucket

 

[slickerthanyou]

This should help ya. http://www.blasterforum.com/general-support-17/downloadable-yamaha-blaster-manual-17325/

 

[brandoz28]

put a penny between the gears, have you gotten the pressure plate off yet? you need to pull the nut off of the center of the hub.

 

[Michael0731]

ya i got the pressure plate off and the friction plates off. Where do i stick the penny, in Which gear Manual says i need a universal clutch holder to hold the clutch boss to remove it don't have one, if i can use a penny that be great.
i have a link to a pic of the clutch with pressure plates off and clutch boss exposed.

 

[brandoz28]

i can't remember exactly, i used the holder for mine. but yeah, you just put the penny between the gear that turns the basket, and the one on the basket

 

[Michael0731]

will a 2004 stock blaster clutch fit a 2001 blaster?