need help moding 2000 blaster

[alllenlewis2]

i got 2000 blaster i want to know wat best mod get for it i want best stuff is 240 big bore best> to go n vf reed cage idk anything about carb most i want to know i see 2 kinda rods +3 n 4 wat one best to use any help i like know best motor set up u can make all way down to muff thx aj

 

[blasterdude14]

for the motor get a vitos 240 and a vitos +3 stroker crank then send it to flotek, wildcard, or kennedy power and have it ported. for the exhaust f7,dynoport, shearer,toomey, or lrd. vf-3 reeds. 30mm carb.

 

[blasterracer817]

okk iff u wanna spend money to get an all out race bike get the ct 240 kit that comes with pipe carb and all that stuff
BLASTER
CT Sonic 240cc Big Bore Blaster Complete Package......$1535.00 Then bye a +4 mm crank trench yur cases send the cylinder and head to flotech kennedy wildcard dimond etc to have the head decked and ports matched for the +4 crank then u have like an ultimate race set up,
BUT if u wanna have a mild ish set u get a +3 Vitos crank, a vitos bbk send the head and cylinder to some one to p+p and deck the head and buy a kihin pj or pwk carb with a toomey b1 pipe kit ull be set

 

[blasterracer817]

oh and yur gonna need better suspension to handle the extra power

 

[blasterracer817]

oh and most ppl say get the +3 and it is alot easyer to install and stuff but i herd u get like a 25% increase in power with the plus 4 ??? so if thats the case i say spend the money to trench the cases

 

[alllenlewis2]

ok i like send atleast 1000 is there any kit on ebay i see 240 kit but do i lookup them the way ya got them man this is a great site hope be sum help n hope learn too .

 

[alllenlewis2]

cant find a vitos +4 crank i found hot rod +4 is that just as good i found big vitos 240 kit for like 600 almost n crank for 180 so 780 i done got high preformance clutch anything i leaving out other stuff have post about frame for it hold on ill post in there thx agian for all ya great hope ill post pic when i get done wit it

 

[jjj_85]

Reading your posts are hard on the brain. Use sentence structure please.....I know I ain't perfect either tho so don't take offense....lol

It sounds like your headed in the right direction. I don't believe Vito's makes a +4 crankshaft but the hot rods one will work fine. Just search for the Vito's big bore kit on ebay. I would recommend a +3 or +4 swinger to go with that extra power. Even with stock power I think the longer swing arm makes for a much better ride. Look into some shocks as well. My last Blaster had a plus 3 swing arm and a 400ex shock and it was a night and day difference. For fronts I can't recommend anything as I have never had anything but the factory stuff. Is your blaster completely stock now? I am doing a similar motor right now and am waiting on my crank. Good Luck with the Build!!!

 

[blasterracer817]

yea its a hotrods and yur gonna want a port and polish from some one like flotek kennedy powersports or 370 to really unleash the power its like 150 at flotek

 

[alllenlewis2]

k only thing i see that i love to find out is how to make it where there is 2 enhaust or Triple exhaust i think it be sweet wont be as loud . will this give more hp too right

 

[alllenlewis2]

and how do i find kennedy power to send in get work done man i love ya guy been big help learning so much found sumthing i lov to death now

 

[blasterracer817]

noo dont itll decrease the back preasure so wont run good