iight... so i just put an SST and powercore 2 on along with superstock reeds, dynojet jet, and a k and n with air box vents.... my friend who is putting the stuff on says the quad wont idle.... he fiddled with the idle/air screws and nothing worked... it most likely needs a good carb cleaning right?
need carb troubleshooting...
- Thread starter 98blasterworked
- Start date
did he use the idle screw thats underneath the seat behind the gas tank? you should be able to adjust it there
Agree with dropping the k&n for a uni. As far as ur issue on the idle. Check under ur seat if ur tors is still hooked up this is where the idle screw is located. As far as the air/fuel screw on the carb. Turn it all the way in don't lock it down tight u just want it to bottom out. Then back it off 1.5 turns. If u don't have a tors u will need to buy a idle kit and put it on ur carb
also make sure u and ur friend do some plug chops to get the jetting dialed in. If u don't know how to do them there us a great guide on this forum detailing how it's done and what to look for when it cones to your plug.
also make sure u and ur friend do some plug chops to get the jetting dialed in. If u don't know how to do them there us a great guide on this forum detailing how it's done and what to look for when it cones to your plug.
Last edited:
or you could just do like i do and hold the gas a little to keep it idling. mine doesnt idle because of the tors top is jacked, but i just keep on the throttle and have no issues.
and until you figur it out stop making new threads and threadjacking others .
if you take some good pictures we can help better
and until you figur it out stop making new threads and threadjacking others .
if you take some good pictures we can help better
lol.. yeah im gonna take pics when i get the quad back... which should be relatively soon and im gonna look at the filter post to see.. i already bought the k&n and its put in.... so idk bec my parents put me on a budget which i went way over so if i want more money they wont be happy... i might be stuck with a k&n and mabes i can get an outerware
if you put the k&n on craigslist i bet you'll get your money back. then you can buy a better filter
do u still need to do plud chopps if the jet kit that came with the quad had 1 needle and nothing else in it.... because thats pretty much all it was
and if u would.... i ride woods with alot of dirt and mud.... so a k&n wasnt the best choice.. a foam wouldve been better...if so then i think i need to buy the outerwares filter...
i just got a k&n and im leaving the lid on so idk if i should worry about dust and stuff... but i do ride trails... alot of dirt and mud
