Need a new carburator

[FMFblaster93]

Hey guys, sorry I didn't know where to post this. I wondered if anyone had a new or used stock (mikuni) carb in perfect working condition they would sell me, I'm sick and tired of fixing mine up.

Secondly, does anyone know if there is a fuel filter on the blaster? If not, has anyone tried to retrofit one? The crap from the tank constantly causing the flat to stick is a major thorn in my arse.

Cheers.

 

[PikledBeats]

I have two stock mikuni's or a mikuni tm34 pm me and let me know what you needI:I

 

[CARNZ]

all you have to do for the filter is put an inline filter in the fuel line from petcock to carb

 

[roadkill]

i have a perfect stocker with the cable and tors still on it just the tors wires are cut, pm if you want to buy it

 

[blasterfreek30]

an in line filter is not needed there is 2 super fine screen filters in the gas tank...and have u COMPLETELY torn aprt the carb and cleaned it and checked for worn needle valve and seats...mabe get a carb rebuild kit

 

[CARNZ]

an in line filter is not needed there is 2 super fine screen filters in the gas tank...and have u COMPLETELY torn aprt the carb and cleaned it and checked for worn needle valve and seats...mabe get a carb rebuild kit

I disagree with it being not needed, I always had a filter on mine and I turned the gas on after replacing the filter once and immediately saw the filter collect some dirt.

 

[blasterfreek30]

heres some pics of the screens in the tank

 

[CARNZ]

I'm not saying I don't believe you. I'm just saying from my personal experience that they don't catch everything. maybe mine were degrading or something, but ill never run without an inline filter. I think for $3.00 its good extra security