I'm was thinking of fabbing up and air box for my blaster just wanna know what size pipe/tube should i use for it and where can i get a uni or K&N air filter cheap?
Making and air box
- Thread starter blasterkiidirl
- Start date
use 2-1/2 " mandrel bend pipe from here, not sure what bend ???
siliconintakes.com
look around at the reducer couplings, my cfm box to 34mm carb takes a 2.5 x 2.25" silicon reducer
look at the intercooler pipes for short bent pieces of aluminum pipe
siliconintakes.com
look around at the reducer couplings, my cfm box to 34mm carb takes a 2.5 x 2.25" silicon reducer
look at the intercooler pipes for short bent pieces of aluminum pipe
My dads turbo car blew up and its not going anywhere so I'll see if i can use anything from that... and I'll get some 2.5" pipe how does that sound?
2.5" sounds good, thats what most A/M boxes use, and there are 2.5" uni pod filters...........
Uni Clamp on 2 5 in Pod Filter 2 Stage 4" x 6" | eBay
with cleaner kit and outerwears and 5 hp. decal I:I........
Uni Clamp on 2 5 Pod Filter 2 Stage 4 x 6 Outerwears | eBay
Last edited by a moderator:
