Latino Blaster

[darealblaster]

UPDATE:
Installed axle and nerfs today. The instructions on the axle are pure crap!!! they are as worthless as they get. But in general cant ask much for how cheap it isI:I When the F7 arrives ill be installing it along with the v-froce and oil block off, gonna do all the engine mods at the same time so jetting doesnt biotch too much.

Im kinda worried cuz maybe the F7 wont fit cuz of nerfs?? i dunno maybe someone can tell me.

 

[tjsdaname]

with my nerfs the F7 is a really tight fit...

but yours could be different... you might have to put the pipe on, then the nerf bars on


and it looks good!

 

[darealblaster]

with my nerfs the F7 is a really tight fit...
but yours could be different... you might have to put the pipe on, then the nerf bars on and it looks good!

Hey TJ on your blaster,on the axle was the larger spacer loose?? cuz when i put mine it was all loose so i jsut left the small one with the c-clip.

 

[DUALSTROKE]

The pipe will clear the nerfs by about 1/2 to 3/4 of an inch.I run the power pros/f7 etc.etc. pipe with the same nerfs and it clears.The blaster is looking good.

 

[darealblaster]

aight thanks dualstroke i was kinda worried.

 

[Blasterb0y794]

Looking good dareal! Go to chat!

 

[super noober]

looks great man I:I I:I, what nerfs are those anyhow?

 

[darealblaster]

looks great man I:I I:I, what nerfs are those anyhow?

They are Tusk Offroad Nerfs

 

[darealblaster]

UPDATE:

F7 arrived and got it isntalled, it was a biotch to put on lol. Rode it and pulls nice but gonna mess with jetting to see, only went 1 size up and it ran good. Dam its too dirty,need to clean it up.

OK, NOW HERES WHERE I NEED HELP!! Tried installing the v-force3 but when i take the stock stuff out and went to put it in i get a brain fart, HOW DA f*ck DOES THIS GO??? Instructions didnt help and im SURE something is missing, here are the pics, help me put it together.

This is all i got, is there something missing?

WTF IS THIS?

 

[89custom]

penis in vagina.


shove that little f*cker into that big one and bam! seriously though, it goes inside and you can see if you got it right by looking at the intake boot. it helps airflow so put it in so the reeds are in the right way then that little thing fits nicely into the intake. make sure u cut off that little tab properly on the stock intake boot. also make sure you use the gaskets in the right spots. dont miss any.

edit: forgot to mention this thing is sick as hell bro. quickly improving it in everywhere needed. nice.

 

[Blasterdude27]

I'm liken it! I:I

 

[darealblaster]

OK, thanks 89 like always yer an awesome help, now which is the right way?? lol im guessing pic 2 is? god dam brain fart I:I

 

[tyler1blaster]

pic 2 looks better! do you plan on getting different types of rear tires? also are those elkas nice?

 

[darealblaster]

Right now i think im staying with this 22's, they slide pretty good for being a tall tire, plus the threads are like new still, 95% thread, it even has the lil hair's lol so till they dont go bald they gonna stay. And yea the elkas are effing nice!!! the difference is more than heaven to earth.

 

[tyler1blaster]

oh really? IM THINKING ABOUT GETTING SOME WORCKS...WILL THOSE MAKE A GOD DIFFERENCE TO?

 

[darealblaster]

Ya those should make a hell of difference as well, stock blaster shocks are among the very most horrible shocks ever built.

 

[REEDracing94]

ya works are great..of course not as good as elkas but still very good

 

[blasterfreek30]

any updates on the build bro

 

[justtwistit]

wow its been a while since i read this thread! everything looks AWESOME!!! really like the way things turned out

 

[sickOne]

nice looking quad....wich part of P.R. you from.. im from P.R. too but i live in Delaware now i go there every summer for vac. and ride my cousins banshee its so nice out there the riding is awesome, my fam. lives in coamo