and how do you set the clip on the needle i had it out and couldn't figure out how to do it. do you have to take those 2 screws out from inside the needle holder?
jetting
- Thread starter bigred85
- Start date
and also the first tank of fuel i ran through it, it had regular 2-cycle oil in it and it fouled out the plug within 30 minutes. and on the needle which way is leaner and which is richer? by the way i appreciate all this info bro!!!!
I am getting tired of chasing you around different threads, please tell me if you want to continue offers of help to you.
We are happy to offer advice but please state your case in one thread and stick to it!
We are happy to offer advice but please state your case in one thread and stick to it!
yeah for sure i was in the wrong place when i typed, i am new on the forum, sorry for inconvenience man.
i have a blaster bored 80 over,ported and polished, boyesen carbon reeds, wiseco piston, dg header, and fat boy exhaust with stock jets in a mikuni carb, i don't know if that is a stock carb or not but i think it is
Providing that the exhaust is clear, and the filter is clean, the oil is correct and at 32:1.
Try a #270 main, 32.5 pilot, needle in the middle clip.
Buy a few b8es plugs and do a plug chop to perfect your jetting.
All other answers you will find in the numerous threads you have posted.
Good luck and please report back when you get it sorted I am interested in your findings.
Try a #270 main, 32.5 pilot, needle in the middle clip.
Buy a few b8es plugs and do a plug chop to perfect your jetting.
All other answers you will find in the numerous threads you have posted.
Good luck and please report back when you get it sorted I am interested in your findings.
.
i just added u as a contact and sent friend request, do you know where i can get the jets at a good price online?
ok thanks so much i will get back with you soon as i get the jets man again i appreciate the info!!!!!
